These systems have been produced for customers over a period of time and are available in the similar or modified form. They also serve as application examples of our products. If you have a requirement for such systems please contact us.
This system was developed to demonstrate the feasibility of using a density measuring instrument and a peristaltic pump to control the concentration of HCl in an automated dilution application. Product Details...
The REDOSTAT leaching control system maintains the redox potential (or the concentrations of ferric and ferrous ions) by using current to oxidize or reduce them. Product Details...
In this application a monitoring system was implemented for a cheese factory in which the requirement was to be able to log the pasteurizing and CIP temperatures, flows and times for each of various parts of the plant. Product Details...
This furnace monitoring system uses standard Danntech Products on an RS485 network with a display and logging application running on a PC. The eight analogue inputs, provided by an MCI are used to measure the AC input current, voltage, active and reactive power and the electrode DC voltage and current. Product Details...
Ideally suited to experimental and pilot plant type operation, the Measurement and Control Interface (MCI) is used here to monitor and control a small chemical plant. A low cost PC which was fitted into a protective steel enclosure with an uninterruptible power supply is used to run the software. Product Details...
This system is a distributed monitoring system for 17 ammonia gas sensors in a refrigeration plant. There are five zones with four of them having three 4-20 mA gas sensor inputs and one other with five 4-20 mA inputs. Product Details...
This system has three in-line leech tanks each with vibrating feeder controls, temperature control, pH monitoring and stirrer speed monitoring. Feed and collection tanks are also used and must be temperature and level controlled. Product Details...
This was designed to assist in electrochemical research using constant current control through a cell arrangement with two solutions separated by a membrane. Product Details...
This system, designed for remote operation, controls the irrigation water pH using hydrochloric, sulphuric and phosphoric acids in a demand driven, premixing system. The ratios of the acids are chosen to suit the soil being irrigated. Product Details...
The revised control system has been designed to replace the original dedicated controller which was no longer useable or serviceable.
A priority was to keep the costs as low as possible and it was decided to implement the controller using various interface components, a standard PC with a specialized counter interface card and software written to replicate the original machine functions. Product Details...
This monitoring system has been designed to try and predict the failure of any particular motor of a bank of 300 motors in a steel plant. Product Details...
In this application a Measurement and Control Interface (MCI) is used with two Relay Multiplexers and a Four Relay Output Module to monitor and control four electrochemical cells. The temperature, electrolyte feed flow, cell current and cell outflow conductivity are controlled in each cell. Product Details...
