Home arrow . arrow Resistance Transmitters arrow Resistance Transmitter 24/12 VDC
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.


Resistance Transmitter 24/12 VDC

Code: GB-MR/

Price:  Call for Pricing







Usually ships in:


Various thermocouple, RTD and resistance inputs. 24 bit analogue input conversion. 12 bit analogue output conversion. Galvanic isolation to 1 000 VDC for all inputs, outputs, power and communications. Two programmable alarm output relays with independent LED operation. PC based configuration and calibration. Detailed access of all inputs, outputs and alarm levels via register based RS232 and RS485 ASCII interface. Configuration software.
  • Various input sensor types: pT100, pT1000, resistance, mV, thermocouples - type K and many others.
  • Analogue output - 4 to 20 mA, 0 to 20 mA, 0 to 5 V, 0 to 10 V, ±5 V and ±10 V (factory configured).
  • User friendly software calibration, output scaling, relay and LED operation, configurable zero, full-scale adjustment.
  • Maximum output load resistance 470 Ω for current outputs.
  • Minimum output load resistance 1 kΩ for voltage outputs.
  • Resolution – 24 bit basic input A to D conversion, 12 bit output resolution.
  • Linearity better than 0.05% of full scale.
  • Minimum step response approximately 2 mSec – depending upon on signal averaging settings.
  • Two signal relay outputs (24 V at 1 A). Configurable operating
    sense – normally open or normally closed, adjustable hysteresis and selectable delay on operate. Software latching of switching level.
  • Two red LED outputs. Configurable operating sense. Software latching of switching level.
  • RS232 using the Configuration Cable (using the Configuration Cable can operate at 9 600 or 19 200 bits/sec).
  • Isolated RS485 communications on terminals 15 and 16 as well as via the DIN rail plug-in connector.
  • Rear plug-in DIN rail bus connection for power and RS485 communications.
  • RS485 baud rates 9 600, 19 200, 57 600 and 115 200 bits/sec.
  • Galvanic isolation between auxiliary supply, input, output and RS485 communications > 1 000 VDC.
  • 24 VDC (-5%, +10%) auxiliary power supply at approx 100 mA.
  • Operating temperature -10°C to 60°C, storage temperature -20°C to 70°C.
  • DIN rail mounting with plug-in screw terminal connections.
  • Dimensions - 22.5 x 118 x 113 mm (width x length top to bottom x height off DIN rail).

You may also be interested in this/these product(s):

Loop Powered Resistance Transmitter
Loop Powered Resistance Transmitter
 Call for Pricing

Last Updated:
RocketTheme Joomla Templates
Currency conversion