Home arrow . arrow Frequency/Pulse Converters arrow Frequency to Process Signal Converter 12/24VDC
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.


Frequency to Process Signal Converter 12/24VDC

Code: GB-FT/

Price:  Call for Pricing

View Datasheet (pdf) (101,48 KB)






Usually ships in:


Input signal frequency range from 0.01 Hz to 100,000 Hz. Output signal range 0-20 mA, 4-20 mA or 0-10 V. Galvanic isolation. Direct connection to proximity sensors NPN or PNP output.
Low cost, non-contact rotational speed monitoring.

Flowmeter pulse output to 4-20 mA conversion.
  • Input signal frequency range from 0.01 Hz to 100,000 Hz (exact range to be specified on order).
  • Input voltage range from 2 VDC (or less) to greater than 15 VDC (up to 27 VDC) - variations on this range are possible.
  • Equivalent input resistance 2 kΩ required input current > 4 mA. ±10% over and under-range on the input.
  • Output signal range 4-20 mA.
  • Output at 1.7 mA when input frequency out of range (for 4-20 mA output versions).
  • Out of range at approximately -10% below minimum and 10% above maximum).
  • Output 0 mA or 0 V for 0-20 mA or 0-10 V output versions.
  • Output load >2 kΩ for the voltage output and 500 Ω maximum for the current output.
  • Output zero and span adjustable approximately ±5% of the range.
  • Step response approximately 300 mSec.
  • Linearity better than 0.2% of full scale.
  • Power On LED (green) flashing at approximately 1 Hz.
  • Frequency Detected LED (yellow) when input frequency is present.
  • Input supply 24 VDC or 12 VDC ±10%.
  • Power supply current 40 mA.
  • Isolation between input, output and DC supply >1000 VDC.
  • Operating temperature -10°C to 60°C.
  • Calibration sheet provided for each unit manufactured.
  • DIN rail mounting.
  • Screw terminal connections.
  • Dimensions 25 x 80 x 85 mm (W x H x D).

Last Updated:
RocketTheme Joomla Templates
Currency conversion