Home arrow . arrow Serial Interface Products arrow Eight Channel Type K TC Input Module 24/12 VDC
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

PDF



Eight Channel Type K TC Input Module 24/12 VDC

Code: RM-0001/

Price:  Call for Pricing


View Datasheet (pdf) (0,00 KB)

:

Availability

Usually ships in:

1-4w.gif


Eight type K thermocouple inputs 0 to 1350°C. Galvanic isolation. Modbus RTU or ASCII comms using RS232 or RS485 16 bit A to D 24 or 12 VDC power. Cold junction compensation, linearisation and open thermocouple detection for each channel. Four digital (switch) inputs. Up to 32 modules can be multi-dropped using RS485. Customised applications using other products.
Specifications:
  • DIN rail mounting with plug-in screw terminal connectors.
  • Manual and software zero and full scale calibration.
  • Power requirements 24 VDC at 200 mA (5 W).
  • On board temperature sensing.
  • Operating temperature -10 °C to 60 °C.
  • Dimensions: 260 x 110 x 30 mm (length x width x height).
Serial communication using the Remote Magic Protocol:
@address, command, register, data, checksum
where: @ - this character must be transmitted to signal the start of the command sequence
address - the module address
command - 1 - Read Configuration
sssssssss.s2 - Read Registers
sssssssss.s3 - Write Registers
sssssssss.s4 - Calibrate
ssssssss.ss5 - Read Run Time
ssssssss.ss6 - Read Raw Data
sssssssss.s7 - Read Bulk Data
register - the register number as applicable to the respective command.
data - the data as applicable to the respective command.
checksum - the checksum is the sum of all the values




Last Updated:
RocketTheme Joomla Templates
Currency conversion