Home arrow . arrow Signal Converters arrow Signal Converter
Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

PDF



View More Images (4)
View More Images (4)

Signal Converter

Code: GB-SC/

Price:  Call for Pricing


Product Brochure - Signal Converter (418,24 KB)
Application Note - Using the Open Collector Output Version of the Signal Converter (86,73 KB)
Application Note - Using the Signal Converter as an Isolator and Signal Splitter (92,44 KB)
Application Note - Voltage Dividers and Current Shunts with Signal Converters (119,12 KB)
Application Note - Generating a Ramp Using the Signal Converter Time Constant (304,97 KB)
Part Numbering - Signal Converter (0,53 MB)
Application Note - Wide Zero and Span Adjustment and Fast Responding Signal Converter (0,64 MB)

:

:

:

:

Availability

Usually ships in:

2-3d.gif


Our range of signal converters provide a convenient way of converting and isolating almost any input voltage or current to commonly used process signal levels. Voltages of down to 50 mV can be converted to a standard current or voltage output. Customized input and output requirements can usually be met on request. A high quality instrumentation amplifier forms the input stage with galvanic isolation between input and output. A filter with adjustable time constant between 0 and 20 seconds is also provided for the filtering of noisy signals.
Applications:
Signal conversion.

Signal isolation.

Filtering of noisy signals.

Elimination of the effects of ground loops from distributed process signals.

The protection of signals against common mode interferences such as motors, contactors and power line surges.

Process signal amplification in situations where the line impedance is too great to effectively drive the required instrumentation.
The current input versions have 50 Ω input impedance and add very little additional loop resistance.

The outputs can drive loads of up to 500 Ω which is sufficient to drive a measurement loop of several kilometres.

Individual channel isolation and the elimination of common mode offsets for non-isolated computer and PLC inputs.
Specifications:
  • Standard input signal ranges from 0-50 mV, ±10 V to 4-20 mA.
  • Bipolar input and output configurations.
  • Customised input and output ranges on request.
  • Input impedance of >100 kΩ for the voltage input and 50 Ω for the current input models.
  • Maximum input signals of 250 V for voltage input and 100 mA for the current input.
  • Output signal ranges of 0-10V, ±10 V, 4-20 mA and 0-20 mA.
  • Output load >2 kΩ for the voltage output and 500 Ω maximum for the current output.
  • Multi-turn trimpot adjustment for zero and span on the front of the unit.
  • Adjustable filter with time constant from 0 to 20 seconds.
  • Frequency response 1 kHz with filter disabled.
  • Linearity better than 0.1% of full scale.
  • Auxiliary supply 115/230 VAC ±10% 50/60 Hz or 12/24 VDC ±5%.
  • Isolation between input and output >1,500 VAC for AC powered versions and >1,000 VAC for DC powered versions.
  • Operating temperature -10°C to +60°C.
  • 24 hour operational burn-in.
  • Calibration sheet provided for each unit manufactured.
  • DIN rail mounting with dimensions 40 x 80 x 85 mm (W x H x D).



You may also be interested in this/these product(s):

Programmable Signal Transmitter 24/12 VDC
Programmable Signal Transmitter 24/12 VDC
 Call for Pricing


Last Updated:
RocketTheme Joomla Templates
Currency conversion