Description
This product is a variation of the Eco-Line Signal Converter with your choice of a DC Current input. The output is a fixed 4-20 mA, to choose other inputs or outputs have a look at the fully Customizable Eco-Line.
Each of these signal converters is configured and burnt in over a 12-24 Hr period. Once burnt in they are then calibrated to ensure accuracy of both the input and the output.
Specifications
- Customised input.
- Selectable filtering options up to 60 seconds.
- Zero and span trimpots can be locked or disabled using a DIP switch.
- Wide or normal zero and span adjustment selection using a DIP switch.
- Input impedance of >100 kΩ for the voltage input and 50 Ω for the current input models.
- Maximum input signals of 100 V for voltage input and 10 A for the current input.
- Output load >2 kΩ for the voltage output and 500 Ω maximum for the current output.
- Step response approximately 200 ms.
- Linearity better than 0.1% of full scale.
- Auxiliary supply 9 to 32 VDC%.
- Isolation between input, output and auxiliary power supply 1,000 VDC.
- Operating temperature -10°C to 70°C.
- 24 hour operational burn-in for every device.
- Calibration sheet provided for each unit manufactured.
- DIN rail mounting with dimensions 25 x 80 x 85 mm (W x H x D).
Documentation
Applications
- Signal conversion, amplification and isolation.
- Elimination of the effects of ground loops from distributed process signals.
- Protection of measurement signals against interference such as generated by motors, contactors and power line surges for non-isolated devices and PLC inputs.
- Process signal amplification in situations where the line impedance is too great to effectively drive the required instrumentation.