Compact, wide bandwidth strain gauge/loadcell amplifier and isolator. With standard input ranges anywhere from ±10 mV to ±1 000 mV. Analogue design for fast response and low noise along with 6 to 20 kHz bandwidth depending upon gain required.

Integral bridge reference power supply 5.000 or 10.000 V - DIP switch selectable and trimpot adjustable.

Specifications

• Standard input signal ranges of ±10 mV, 0-10mV, ±20 mV,
  0-20mV and many others up to ±1 000 mV.
• High quality instrumentation amplifier front end.
• Input impedance >3 MΩ.
• Loadcell resistance minimum: 250 Ω.
• Five wire loadcell connections.
• High speed optical isolation > 2 kV.
• -3dB bandwidth 6 kHz for ±10 mV input, 10 kHz for ±20 mV input, 15kHz for ±40 mV input.
• Step response without filter: approximately 40 μS.
• Ultra precision internal voltage references for both input and output circuits.
• Voltage output signal ranges of 0-10V, ±10 V, 0-5 V or ±5 V.
• Current outputs 0-20 mA and 4-20 mA.
• Output load >2 kΩ for the voltage output.
• Multi-turn trimpot adjustment for Output Zero and Span and
  Input Zero and Span.
• 10% over-range capability.
• Linearity better than 0.25% of full scale.
• Excitation switch selectable: 5.0 V and 10.0 V and trimpot adjustable, current limited.
• Auxiliary supply AC: 90 – 264 VAC, 47 – 63 Hz or 120 – 370 VDC.
  Auxiliary supply DC: 24 VDC, 12 VDC -5%, +10%, 9 - 18 VDC, 18 – 36 VDC, 36 – 72 VDC.
• Isolation power in to input and output: 1000 VDC for DC powered versions and 3750 VAC for mains powered versions.
• Operating temperature -10 to 60°C.
• 24 hour operational burn-in.
• Calibration sheet provided for each unit manufactured.
• DIN rail mounting.
• Screw terminal connections.
• Dimensions 40 x 80 x 85 mm (W x H x D).
• Weight packaged = 160g, unpackaged = 130g.